Do You Need to Change Your Oil Every 3,000 Miles?



Do You Need to Change Your Oil Every 3,000 Miles?

If you’re troubled or concerned about the oil change interval in your car, this article should solve your need. It’s simple! You don’t have to change the oil as often as the 3,000-mile interval. This would only apply to vehicles that are old, worn out or driven around in extreme climatic conditions. Most manufacturers suggest an oil change every 5,000, 7,500 or 10,000 mile interval, depending on the make or brand. Once you come to this interval and wish to change the oil by yourself, feel free to do it. It isn’t all that complicated and could even save you quite a lot.

Vehicle Manual


To begin with, run through the vehicle manual and understand the weight and type of oil required for the vehicle. Additionally, be sure to read about the oil viscosity. The latest vehicle brands rely on the right oil pressure for the car’s smooth functioning. A wrong number could bring damage to your car so be sure to follow the recommendations in the manual.

Filter


The filter you buy will have an indirect effect on the oil change intervals of your car. If you consider using synthetic oil, make sure to buy a filter that would adapt to this oil because an economic or cheap quality filter may not do a good job.

Oil Change


If you will be changing the oil yourself, make sure to follow these simple instructions. Place a plastic sheet on the ground and park your vehicle over it. This plastic sheet should save you the trouble of cleaning up the ground later. Your next step would be to jack up the car, have the jack stand set in the required position and lower the vehicle.

Make sure to keep all tools or equipments over a tray and ready to use once you begin the procedure. The tools will include a new filter and a drain pipe, rubber mallet, filter wrench and a box-end wrench, particularly for the drain pipe. Have the drain plug removed to let the old oil flow out. Having done so, extract the old filter and place in a new filter. Your next step would be to install a gasket over the plug and have it tightened with the box-end wrench and a rubber mallet. This should get the job done but make sure to wipe out all drips with a piece of cloth.

Tips

Below are a few tips you may also want to keep in mind:

1. Avoid using a socket or an adjustable wrench over the drain plug. Instead, consider the right sized box-end wrench for the job.


2. Consider choosing a jack stand over a jack alone.


3. When tightening the filter, make sure to always hand-tighten it. Avoid a filter wrench at all times.


4. Make sure to always line up or place the oil bottles in order before starting with the process. This should help you keep count.


5. Make use of clean oil to coat the filter gasket before giving it a spin.


Tags: